Skip to main content
How do I reset my Stream TV remote control and pair it to my Stream TV Box?

Support Articles

How do I reset my Stream TV remote control and pair it to my Stream TV Box?

Use the following steps to reset your Stream TV remote:

  1. Press and hold the TiVo and POWER buttons on the remote simultaneously for approximately 3 seconds, until the activity light turns solid red. Note: If you don’t press the buttons exactly at the same time, you may see the activity light flash yellow or yellow/red instead. Try again after the light stops flashing.

  2. Press VOLUME DOWN three times.

  3. Press the TiVo button.

  4. The activity light will flash red three times.

  5. Remove the batteries from the remote for at least 10 seconds.

The remote is now reset and can be paired with your Stream TV Box with these steps:

  1. Insert the batteries into the remote.

  2. Press the TiVo button to start the pairing process.

  3. The indicator light will blink amber/yellow slowly while it searches for the Stream TV Box. It will then blink amber/yellow quickly 5 times when pairing is successful.


Need more help?

Try these next steps: